Itc-308-WiFi - possible issue?

[Tania]

Hello,
According to the description, the ITC-308-WIFI may have triggered a special mode.
Please set SV=25, HD=1, CD=1 and exit the settings. After allowing it to run automatically for 2-3 cycles, it will enter normal mode.
For the triggering conditions of the special mode, please refer to the post:

Q&A: How does ITC-308WIFI work?

ITC-308WIFI has a special temperature mode and a normal temperature mode. The trigger conditions for the special temperature mode are: Enter the setting mode through the SET key then exit. Enter the setting mode through the app then exit. In the special temperature mode, ITC-308WIFI will ignore the settings of HD (Heating hysteresis temperature) and CD (Cooling back temperature) and turn on the heating/cooling output. It will not enter the normal mode until the temperature reaches the SV tar…