# Itc100 programming

**URL:** <https://community.inkbird.com/t/itc100-programming/166084>\
**Category:** Questions & Answers\
**Created:** [September 17, 2024, 6:18pm UTC](https://community.inkbird.com/t/itc100-programming/166084 "2024-09-17T18:18:04Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![GTodd](https://avatars.discourse-cdn.com/v4/letter/g/97f17d/32.png) [@GTodd](https://community.inkbird.com/u/GTodd)\
**Post date:** [September 17, 2024, 6:18pm UTC](https://community.inkbird.com/t/itc100-programming/166084/1 "2024-09-17T18:18:04Z")

</div>

I need to see why the itc100 is not changing from NC to NO when it reaches the set temperature

---

<div class="post-metadata">

**Author:** ![Tania](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.inkbird.com/tania/32/88_2.png) [@Tania](https://community.inkbird.com/u/Tania)\
**Post date:** [September 20, 2024, 2:55am UTC](https://community.inkbird.com/t/itc100-programming/166084/2 "2024-09-20T02:55:26Z")

</div>

Hello,  
May I know the model of ITC-100 you purchased? Is it ITC-100VH?  
Do you mean when the temperature reaches the SV target value, but the output is still on? Please check if the ‘OUT’ indicator of ITC-100 is off?  
 ![image](https://canada1.discourse-cdn.com/flex031/uploads/inkbird1/original/1X/c307c3010c1ac1bd58d1f854ee3f6fc50de18b42.jpeg)
