# ITC-608T not showing humidity when programming **URL:** \ **Category:** Uncategorized\ **Created:** [January 10, 2024, 1:37pm UTC](https://community.inkbird.com/t/itc-608t-not-showing-humidity-when-programming/124972 "2024-01-10T13:37:43Z")\ **Posts on this page:** 4\ **Page:** 1
**Author:** ![Mudkat514](https://avatars.discourse-cdn.com/v4/letter/m/35a633/32.png) [@Mudkat514](https://community.inkbird.com/u/Mudkat514)\ **Post date:** [January 10, 2024, 1:37pm UTC](https://community.inkbird.com/t/itc-608t-not-showing-humidity-when-programming/124972/1 "2024-01-10T13:37:43Z")
I bought this last year and has been working great. I had to turn it off (unplug) for a couple of months. I just started using it again. I plugged it in and when programming, it only shows temperature. It will not show the humidity settings. How can I get the humidity back on there? Or, is there a way to reset it? Thanks ---
**Author:** ![Tania](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.inkbird.com/tania/32/88_2.png) [@Tania](https://community.inkbird.com/u/Tania)\ **Post date:** [January 18, 2024, 3:08am UTC](https://community.inkbird.com/t/itc-608t-not-showing-humidity-when-programming/124972/2 "2024-01-18T03:08:01Z")
Hello, Just to confirm, are the temperature and humidity probes plugged into the ITC-608T? Could you provide a photo showing the ITC-608T with the temperature probe and humidity probe plugged in, but the ITC-608T only displays the temperature reading? ---
**Author:** ![Mudkat514](https://avatars.discourse-cdn.com/v4/letter/m/35a633/32.png) [@Mudkat514](https://community.inkbird.com/u/Mudkat514)\ **Post date:** [January 24, 2024, 12:31am UTC](https://community.inkbird.com/t/itc-608t-not-showing-humidity-when-programming/124972/3 "2024-01-24T00:31:04Z")
Yes, both are plugged in. ![1000015855](https://canada1.discourse-cdn.com/flex031/uploads/inkbird1/original/2X/b/bdd1679f5f2cfebb8b5f469744f873c4bc91e753.jpeg) ---
**Author:** ![Tania](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.inkbird.com/tania/32/88_2.png) [@Tania](https://community.inkbird.com/u/Tania)\ **Post date:** [January 26, 2024, 9:46am UTC](https://community.inkbird.com/t/itc-608t-not-showing-humidity-when-programming/124972/4 "2024-01-26T09:46:09Z")
Please insert the temperature probe into ports p1 and p2 to test. If the ITC-608T can read the temperature normally, it means there is a problem with the humidity probe. The ITC-608T humidity probe has a 1-year warranty. Please provide the link to this post and order information to email [support@inkbird.com](mailto:support@inkbird.com) for after-sales service.