# ITC - 608T Humidity Overshooting Setpoint

**URL:** <https://community.inkbird.com/t/itc-608t-humidity-overshooting-setpoint/127702>\
**Category:** Questions & Answers\
**Created:** [January 19, 2024, 3:54am UTC](https://community.inkbird.com/t/itc-608t-humidity-overshooting-setpoint/127702 "2024-01-19T03:54:43Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![mlagerton](https://avatars.discourse-cdn.com/v4/letter/m/c5a1d2/32.png) [@mlagerton](https://community.inkbird.com/u/mlagerton)\
**Post date:** [January 19, 2024, 3:54am UTC](https://community.inkbird.com/t/itc-608t-humidity-overshooting-setpoint/127702/1 "2024-01-19T03:54:43Z")

</div>

Here is my set-up and my problem.  
I’ve got a bacterial growth system built using ITC 608T and need to hold a specific temp and humidity. I have the Temp sensor in Work 1 and Humidity in Work 2.

Work 1 controls a heating mat at 38C. This turns the mat on and off without issue. Work 2 is controlling an Inkbird Plus reptile mister. My %RH I’m trying to hold is 70-80% RH but find I’m overshooting to 100%. I have the mister turned on it’s lowest setting so that it doesn’t overwhelm the chamber with significant volume of mist. I’ve tried lowering the setpoint to around 50%RH but the system still overshoots.

So my HS is set to 70%, DS at 5%, AH at 85%, AL at 5%, PT is 0, and CA is 0. I do not have a dehumidifier attached at this time.

What control parameter am I missing that would allow me to make an adjustment while tuning to control between my HS and AH?

Any help is greatly appreciated.