# Itc-308-WiFi - possible issue?

**URL:** <https://community.inkbird.com/t/itc-308-wifi-possible-issue/166950>\
**Category:** Questions & Answers\
**Tags:** smart-controller\
**Created:** [August 15, 2025, 8:45am UTC](https://community.inkbird.com/t/itc-308-wifi-possible-issue/166950 "2025-08-15T08:45:27Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Tania](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.inkbird.com/tania/32/88_2.png) [@Tania](https://community.inkbird.com/u/Tania)\
**Post date:** [September 3, 2025, 7:43am UTC](https://community.inkbird.com/t/itc-308-wifi-possible-issue/166950/2 "2025-09-03T07:43:40Z")

</div>

Hello,  
According to the description, the ITC-308-WIFI may have triggered a special mode.  
Please set SV=25, HD=1, CD=1 and exit the settings. After allowing it to run automatically for 2-3 cycles, it will enter normal mode.  
For the triggering conditions of the special mode, please refer to the post:

> [@Q&A: How does ITC-308WIFI work?](https://community.inkbird.com/t/q-a-how-does-itc-308wifi-work/151):
>
> ITC-308WIFI has a special temperature mode and a normal temperature mode. The trigger conditions for the special temperature mode are: Enter the setting mode through the SET key then exit. Enter the setting mode through the app then exit. In the special temperature mode, ITC-308WIFI will ignore the settings of HD (Heating hysteresis temperature) and CD (Cooling back temperature) and turn on the heating/cooling output. It will not enter the normal mode until the temperature reaches the SV tar…

---

_[View the full topic](https://community.inkbird.com/t/itc-308-wifi-possible-issue/166950)._