# ITC-308 going wild

**URL:** <https://community.inkbird.com/t/itc-308-going-wild/166032>\
**Category:** Questions & Answers\
**Tags:** smart-controller\
**Created:** [August 23, 2024, 11:11pm UTC](https://community.inkbird.com/t/itc-308-going-wild/166032 "2024-08-23T23:11:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rubberducky](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.inkbird.com/rubberducky/32/5754_2.png) [@Rubberducky](https://community.inkbird.com/u/Rubberducky)\
**Post date:** [August 23, 2024, 11:11pm UTC](https://community.inkbird.com/t/itc-308-going-wild/166032/1 "2024-08-23T23:11:52Z")

</div>

My ITC-308 wifi has been working well for a month, but today it started reading really high “current Temp” values that are around 15-20° too high. I confirmed this with an independent thermometer. Is there a way to reset it to factory settings?

I also sat and watched the readings for a minute or two, and they jump all over the place. Is my probe broken?

---

<div class="post-metadata">

**Author:** ![Tania](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.inkbird.com/tania/32/88_2.png) [@Tania](https://community.inkbird.com/u/Tania)\
**Post date:** [August 26, 2024, 2:52am UTC](https://community.inkbird.com/t/itc-308-going-wild/166032/2 "2024-08-26T02:52:38Z")

</div>

Hello,  
Please dry the probe with a hairdryer and then test the room temperature. Is the reading accurate?  
If it still has a deviation of 15-20 degrees, please provide the probe placement environment, problem photos, and order information to **email** [support@inkbird.com](mailto:support@inkbird.com) for after-sales service.  
Since forum posts are public, these may involve private information, please do not reply here.  
Thanks.