# ITC 106VH, thermocouple calibration

**URL:** <https://community.inkbird.com/t/itc-106vh-thermocouple-calibration/166395>\
**Category:** Questions & Answers\
**Created:** [January 20, 2025, 4:01am UTC](https://community.inkbird.com/t/itc-106vh-thermocouple-calibration/166395 "2025-01-20T04:01:48Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![patmat2350](https://avatars.discourse-cdn.com/v4/letter/p/8dc957/32.png) [@patmat2350](https://community.inkbird.com/u/patmat2350)\
**Post date:** [January 20, 2025, 4:01am UTC](https://community.inkbird.com/t/itc-106vh-thermocouple-calibration/166395/1 "2025-01-20T04:01:48Z")

</div>

Instructions say: “6.23 …the temperature need to be calibrated for there will be deviation…”

How do we perform corrections, if needed, to the measured value?  
Is this the Input Sensing \> Calibration Unit/Setting Range?

And WHAT is Digital Filtering?

Thanks…

---

<div class="post-metadata">

**Author:** ![Tania](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.inkbird.com/tania/32/88_2.png) [@Tania](https://community.inkbird.com/u/Tania)\
**Post date:** [January 21, 2025, 8:51am UTC](https://community.inkbird.com/t/itc-106vh-thermocouple-calibration/166395/2 "2025-01-21T08:51:57Z")

</div>

Hello,  
If you want to change the calibration value, please set it through the SC function.  
For example, if the probe reading is 1 degree higher than the actual value, please set SC= -1.  
If the probe reading is 2 degrees lower than the actual value, please set SC=2.  
For more information about Digital Filtering, please refer to:

 ![image](https://canada1.discourse-cdn.com/flex031/uploads/inkbird1/original/2X/5/5b86a0e73f2a92630f531c132c3542d6cb15cc38.png)