# ITC-106 Is there a way to set the output power percentage?

**URL:** <https://community.inkbird.com/t/itc-106-is-there-a-way-to-set-the-output-power-percentage/461>\
**Category:** Questions & Answers\
**Created:** [April 7, 2022, 9:46pm UTC](https://community.inkbird.com/t/itc-106-is-there-a-way-to-set-the-output-power-percentage/461 "2022-04-07T21:46:53Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![no\_spam](https://avatars.discourse-cdn.com/v4/letter/n/a183cd/32.png) [@no\_spam](https://community.inkbird.com/u/no_spam)\
**Post date:** [April 7, 2022, 9:46pm UTC](https://community.inkbird.com/t/itc-106-is-there-a-way-to-set-the-output-power-percentage/461/1 "2022-04-07T21:46:53Z")

</div>

Once I set my desired temp the SSR switches my heating element fully on (17 amps). Can I set a parameter to turn it half on (8.5 amps)? I noticed that once it achieve my desired temp, the heating element only draws 3 to 6 amps to maintain that desired temp.

Thanks,  
Rich

---

<div class="post-metadata">

**Author:** ![Tania](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.inkbird.com/tania/32/88_2.png) [@Tania](https://community.inkbird.com/u/Tania)\
**Post date:** [April 8, 2022, 3:53am UTC](https://community.inkbird.com/t/itc-106-is-there-a-way-to-set-the-output-power-percentage/461/2 "2022-04-08T03:53:26Z")

</div>

Hello,  
ITC-106 can set manual output %.  
Please:  
 ![image](https://canada1.discourse-cdn.com/flex031/uploads/inkbird1/original/1X/1d41f06337bec47466a7903bdab4529609e400da.jpeg)

1.long press the SET button for about 3 seconds to enter the setting mode.  
2.short press the SET button to switch directories, and then find oP.  
3.press \< button to the sub-directory, then short press the SET button to switch the directory to run.  
4.press up/ down button to set it to manu  
5.long press the SET button for about 3 seconds to exit the setting mode.  
6.press the SET button for about 1 second, it will enter manual mode (SV will display an 'm’ icon), please press up/down button to set the output value.  
 ![image](https://canada1.discourse-cdn.com/flex031/uploads/inkbird1/original/1X/525a825ab5bf490be11a0fdee473293819f11410.png)

---

<div class="post-metadata">

**Author:** ![no\_spam](https://avatars.discourse-cdn.com/v4/letter/n/a183cd/32.png) [@no\_spam](https://community.inkbird.com/u/no_spam)\
**Post date:** [April 11, 2022, 3:52pm UTC](https://community.inkbird.com/t/itc-106-is-there-a-way-to-set-the-output-power-percentage/461/3 "2022-04-11T15:52:35Z")

</div>

Fantastic! Thank you for such a quick and detailed reply.