# ISC-007bw Wifi and Temp reading issues **URL:** \ **Category:** Questions & Answers\ **Created:** [September 5, 2023, 2:15pm UTC](https://community.inkbird.com/t/isc-007bw-wifi-and-temp-reading-issues/83507 "2023-09-05T14:15:06Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![Eggzlot](https://avatars.discourse-cdn.com/v4/letter/e/6f9a4e/32.png) [@Eggzlot](https://community.inkbird.com/u/Eggzlot)\ **Post date:** [September 5, 2023, 2:15pm UTC](https://community.inkbird.com/t/isc-007bw-wifi-and-temp-reading-issues/83507/1 "2023-09-05T14:15:06Z")
I’ve used the ISC-007bw maybe 3-4 times and didn’t have issues. I went to use it Sunday and had 2 odd issues: 1. would not connect to Wifi (no changes to my network). It did connect via Bluetooth. I was not able to reset the Wifi connection, pressing/holding the Wifi button did not make the light blink fast (or slow) so I could not re-enter the Wifi Set up Mode 2. I was getting some very odd temp readings, so after poking around I noticed: a) when no probes were plugged in, it was reading 9 degrees but… b) somehow all 3 ports were adjusted up 32 degrees so after a probe WAS plugged in, it was reading 32 degrees too hot I used a thermapen later on with some boiling water and realized the Inkbird was off by ~30 degrees, that is when I dug through the menus to see the adjustments were made, which is odd, but even odder, it was showing 9 degrees with no probe plugged into the ports. What is going on with this device - the Wifi being the biggest concern. ---
**Author:** ![Eggzlot](https://avatars.discourse-cdn.com/v4/letter/e/6f9a4e/32.png) [@Eggzlot](https://community.inkbird.com/u/Eggzlot)\ **Post date:** [September 7, 2023, 3:27pm UTC](https://community.inkbird.com/t/isc-007bw-wifi-and-temp-reading-issues/83507/2 "2023-09-07T15:27:16Z")
@Tania - any thoughts? ---
**Author:** ![Tania](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.inkbird.com/tania/32/88_2.png) [@Tania](https://community.inkbird.com/u/Tania)\ **Post date:** [September 8, 2023, 6:26am UTC](https://community.inkbird.com/t/isc-007bw-wifi-and-temp-reading-issues/83507/3 "2023-09-08T06:26:49Z")
Hello, Just to confirm, are you using the latest version of INKBIRD APP? Please note that the WIFI button is a touch screen button. If still having problems, is it possible to provide a video to show: long press the WIFI button for 3 seconds, the WIFI indicator will not flash; no probe inserted, but the ISC-007BW screen will show the 9 degrees reading? Please send the video to email [support@inkbird.com](mailto:support@inkbird.com). Please provide the order information and phone model together. For probe reading deviation, please refer to: Please put the probe and probe’s cable (excluding the probe’s plug) in a 150C (302 F) oven for 30 minutes, then test it with boiling water ( please hang the probes and do not let it touch the container). Can it work? ---
**Author:** ![Eggzlot](https://avatars.discourse-cdn.com/v4/letter/e/6f9a4e/32.png) [@Eggzlot](https://community.inkbird.com/u/Eggzlot)\ **Post date:** [September 8, 2023, 4:43pm UTC](https://community.inkbird.com/t/isc-007bw-wifi-and-temp-reading-issues/83507/4 "2023-09-08T16:43:55Z")
Hi @Tania 1. the App is “InkBird Pro v 3.5.8” 2. The reading of 9 degrees with no probe inserted has been fixed - for some reason all 3 probes were set to +32 degrees so I had to adjust them back down to 0. I never did this so no idea why it happened 3. The Wifi button - I press it for 3 seconds, the Wifi light doesnt blink fast, it doesnt blink slow, it is not solid, just no light at all. As mentioned, I tested/calibrated the probes - so they work, my question was WHY did I turn it on and they were set to +32 degrees in the calibration menu when I never did that and personally didnt know there was a calibration setting so I took me a long time to figure it out. And then the Wifi Issue is the other question. ---
**Author:** ![Tania](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.inkbird.com/tania/32/88_2.png) [@Tania](https://community.inkbird.com/u/Tania)\ **Post date:** [September 14, 2023, 4:28am UTC](https://community.inkbird.com/t/isc-007bw-wifi-and-temp-reading-issues/83507/5 "2023-09-14T04:28:54Z")
Just to confirm, is this the WIFI button you pressed? ![image](https://canada1.discourse-cdn.com/flex031/uploads/inkbird1/original/2X/1/125afc5d92e0e4ad817541a1e2c441c4a80dface.jpeg) Please check indoors. If it’s in a place with strong light, its indicator light may not be visible clearly. If the indicator light still does not light up, please email [support@inkbird.com](mailto:support@inkbird.com) with order information and a video of this problem. About the APP, maybe you can try INKBIRD APP? It is upgraded from INKBIRD PRO APP.