# Inkbird 308i wifi problems

**URL:** <https://community.inkbird.com/t/inkbird-308i-wifi-problems/10514>\
**Category:** Uncategorized\
**Created:** [January 6, 2023, 4:08pm UTC](https://community.inkbird.com/t/inkbird-308i-wifi-problems/10514 "2023-01-06T16:08:38Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Tania](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.inkbird.com/tania/32/88_2.png) [@Tania](https://community.inkbird.com/u/Tania)\
**Post date:** [January 9, 2023, 2:55am UTC](https://community.inkbird.com/t/inkbird-308i-wifi-problems/10514/2 "2023-01-09T02:55:38Z")

</div>

Hello,  
Please note that ITC-308-WIFI is a temperature controller, it changes the output according to the change of temperature reading.  
Please refer to this post:

> [@Q&A: How does ITC-308WIFI work?](https://community.inkbird.com/t/q-a-how-does-itc-308wifi-work/151):
>
> ITC-308WIFI has a special temperature mode and a normal temperature mode. The trigger conditions for the special temperature mode are: Enter the setting mode through the SET key then exit. Enter the setting mode through the app then exit. In the special temperature mode, ITC-308WIFI will ignore the settings of HD (Heating hysteresis temperature) and CD (Cooling back temperature) and turn on the heating/cooling output. It will not enter the normal mode until the temperature reaches the SV tar…

---

_[View the full topic](https://community.inkbird.com/t/inkbird-308i-wifi-problems/10514)._