# IBS-P01R Temp does not appear on monitor

**URL:** <https://community.inkbird.com/t/ibs-p01r-temp-does-not-appear-on-monitor/246>\
**Category:** Questions & Answers\
**Created:** [January 13, 2022, 7:16pm UTC](https://community.inkbird.com/t/ibs-p01r-temp-does-not-appear-on-monitor/246 "2022-01-13T19:16:56Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mike](https://avatars.discourse-cdn.com/v4/letter/m/58f4c7/32.png) [@Mike](https://community.inkbird.com/u/Mike)\
**Post date:** [January 13, 2022, 7:16pm UTC](https://community.inkbird.com/t/ibs-p01r-temp-does-not-appear-on-monitor/246/1 "2022-01-13T19:16:56Z")

</div>

I am trying to set up the above pool temp sensor and monitor.  
the Sensor is showing the current pool temp however the monitor shows only dashes where there should be a temp shown.  
The book of instructions is too complicated to follow.  
Can anyone give me a simple explanation?

---

<div class="post-metadata">

**Author:** ![Tania](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.inkbird.com/tania/32/88_2.png) [@Tania](https://community.inkbird.com/u/Tania)\
**Post date:** [January 14, 2022, 3:58am UTC](https://community.inkbird.com/t/ibs-p01r-temp-does-not-appear-on-monitor/246/2 "2022-01-14T03:58:46Z")

</div>

Hello,  
Please unplug the battery of the IBS-P01R-O transmitter first, press the TX button inside the cover of the IBS-P01R-O transmitter, then reinstall the battery, and press the tx button again, it will flash the indicator light once, indicating that the signal is transmitting. The IBS-P01R-O receiver does not need to remove the battery. Can it be connected?

---

<div class="post-metadata">

**Author:** ![Mike](https://avatars.discourse-cdn.com/v4/letter/m/58f4c7/32.png) [@Mike](https://community.inkbird.com/u/Mike)\
**Post date:** [January 14, 2022, 12:23pm UTC](https://community.inkbird.com/t/ibs-p01r-temp-does-not-appear-on-monitor/246/3 "2022-01-14T12:23:53Z")

</div>

Yes thank you  
Now working

---

<div class="post-metadata">

**Author:** ![sstack](https://avatars.discourse-cdn.com/v4/letter/s/b782af/32.png) [@sstack](https://community.inkbird.com/u/sstack)\
**Post date:** [January 18, 2022, 1:15am UTC](https://community.inkbird.com/t/ibs-p01r-temp-does-not-appear-on-monitor/246/4 "2022-01-18T01:15:37Z")

</div>

What if there is no TX button? Monitor only shows the indoor temp but not the outdoor water temp.

---

<div class="post-metadata">

**Author:** ![Tania](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.inkbird.com/tania/32/88_2.png) [@Tania](https://community.inkbird.com/u/Tania)\
**Post date:** [January 18, 2022, 11:07am UTC](https://community.inkbird.com/t/ibs-p01r-temp-does-not-appear-on-monitor/246/5 "2022-01-18T11:07:31Z")

</div>

There is a TX button inside the transmitter cover of IBS-P01R (please note that it is not a receiver). If it is IBS-P01/ IBS-01B, there is no TX button. The IBS-P01/ IBS-01B cannot be connected to the IBS-P01R-I receiver.