# IBS-M2 displays pool thermometer and home temp but mobile app only shows home temp

**URL:** <https://community.inkbird.com/t/ibs-m2-displays-pool-thermometer-and-home-temp-but-mobile-app-only-shows-home-temp/166708>\
**Category:** Uncategorized\
**Created:** [May 12, 2025, 4:48pm UTC](https://community.inkbird.com/t/ibs-m2-displays-pool-thermometer-and-home-temp-but-mobile-app-only-shows-home-temp/166708 "2025-05-12T16:48:51Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Tania](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.inkbird.com/tania/32/88_2.png) [@Tania](https://community.inkbird.com/u/Tania)\
**Post date:** [May 20, 2025, 8:01am UTC](https://community.inkbird.com/t/ibs-m2-displays-pool-thermometer-and-home-temp-but-mobile-app-only-shows-home-temp/166708/2 "2025-05-20T08:01:48Z")

</div>

Hello,  
When using IBS-M2 and sensors for the first time, users need to manually add the sensors through the INKBIRD app.  
Please note that it is added through the INKBIRD app → IBS-M2 settings page.  
Instead of adding sensors through the ‘+’ in the upper right corner of the INKBIRD app homepage.  
Please refer to the link:

> [@Q&A: How to connect the IBS-M2 to a sub-device (sensor)](https://community.inkbird.com/t/q-a-how-to-connect-the-ibs-m2-to-a-sub-device-sensor/56800/5):
>
> Sorry IBS-P03R is not compatible with IBS-M2. A gateway compatible with IBS-P03R is still under development.

---

_[View the full topic](https://community.inkbird.com/t/ibs-m2-displays-pool-thermometer-and-home-temp-but-mobile-app-only-shows-home-temp/166708)._