# Disable ITC-308-WIFI Heating Outlet or Change it to both Outets for Cooling only

**URL:** <https://community.inkbird.com/t/disable-itc-308-wifi-heating-outlet-or-change-it-to-both-outets-for-cooling-only/91100>\
**Category:** Uncategorized\
**Created:** [October 7, 2023, 6:18pm UTC](https://community.inkbird.com/t/disable-itc-308-wifi-heating-outlet-or-change-it-to-both-outets-for-cooling-only/91100 "2023-10-07T18:18:57Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![passtron](https://avatars.discourse-cdn.com/v4/letter/p/f0a364/32.png) [@passtron](https://community.inkbird.com/u/passtron)\
**Post date:** [October 7, 2023, 6:18pm UTC](https://community.inkbird.com/t/disable-itc-308-wifi-heating-outlet-or-change-it-to-both-outets-for-cooling-only/91100/1 "2023-10-07T18:18:57Z")

</div>

Today, I have a new itc-308-wifi. I use it to turn on a closet exhaust fan when the temp gets to 95f. Works fine. I really did not want two plug outlets with one to activate heating since that is not an issue for me. Is there a way to disable the heating outlet to never come on, or even better, to include both outlets for cooling only? Can’t see a way to set the heating offset to zero as far as i can tell. I just don’t want the second (heating) outlet to activate even if there is nothing plugged into it.

Thanks…

---

<div class="post-metadata">

**Author:** ![Tania](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.inkbird.com/tania/32/88_2.png) [@Tania](https://community.inkbird.com/u/Tania)\
**Post date:** [October 8, 2023, 7:27am UTC](https://community.inkbird.com/t/disable-itc-308-wifi-heating-outlet-or-change-it-to-both-outets-for-cooling-only/91100/2 "2023-10-08T07:27:14Z")

</div>

Hello,  
Sorry, the heating socket of the ITC-308-WIFI cannot be disabled, nor can it be converted into a cooling socket.  
Maybe you could set the Heating hysteresis temperature (HD) to the maximum value?  
In this way, it needs to cool down to a relatively low temperature to trigger the heating output.

> [@Q&A: How does ITC-308WIFI work?](https://community.inkbird.com/t/q-a-how-does-itc-308wifi-work/151):
>
> ITC-308WIFI has a special temperature mode and a normal temperature mode. The trigger conditions for the special temperature mode are: Enter the setting mode through the SET key then exit. Enter the setting mode through the app then exit. In the special temperature mode, ITC-308WIFI will ignore the settings of HD (Heating hysteresis temperature) and CD (Cooling back temperature) and turn on the heating/cooling output. It will not enter the normal mode until the temperature reaches the SV tar…