# Count down on the application does not work **URL:** \ **Category:** Questions & Answers\ **Tags:** sous-vides\ **Created:** [April 17, 2024, 9:18am UTC](https://community.inkbird.com/t/count-down-on-the-application-does-not-work/150790 "2024-04-17T09:18:18Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![yulia.sherman](https://avatars.discourse-cdn.com/v4/letter/y/90db22/32.png) [@yulia.sherman](https://community.inkbird.com/u/yulia.sherman)\ **Post date:** [April 17, 2024, 9:18am UTC](https://community.inkbird.com/t/count-down-on-the-application-does-not-work/150790/1 "2024-04-17T09:18:18Z")
The countdown in the application does not make progress, as expected. It looks like it progresses by a few seconds in a few minutes. ---
**Author:** ![Tania](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.inkbird.com/tania/32/88_2.png) [@Tania](https://community.inkbird.com/u/Tania)\ **Post date:** [April 19, 2024, 9:10am UTC](https://community.inkbird.com/t/count-down-on-the-application-does-not-work/150790/2 "2024-04-19T09:10:05Z")
Hello, May I know the product model? ---
**Author:** ![vandyckruben](https://avatars.discourse-cdn.com/v4/letter/v/a4c791/32.png) [@vandyckruben](https://community.inkbird.com/u/vandyckruben)\ **Post date:** [April 19, 2024, 4:27pm UTC](https://community.inkbird.com/t/count-down-on-the-application-does-not-work/150790/3 "2024-04-19T16:27:29Z")
Same problem here. ISV-200W. It heats up, then when I set a timer thorigh the inkbird app, it says it is cooking but the timer won’t progress (or at 1 second per minute or so) ---
**Author:** ![vandyckruben](https://avatars.discourse-cdn.com/v4/letter/v/a4c791/32.png) [@vandyckruben](https://community.inkbird.com/u/vandyckruben)\ **Post date:** [April 19, 2024, 4:56pm UTC](https://community.inkbird.com/t/count-down-on-the-application-does-not-work/150790/4 "2024-04-19T16:56:25Z")
Nevermind, I see the timer is HH:mm, makes sense now 😃 ---
**Author:** ![yulia.sherman](https://avatars.discourse-cdn.com/v4/letter/y/90db22/32.png) [@yulia.sherman](https://community.inkbird.com/u/yulia.sherman)\ **Post date:** [April 19, 2024, 5:28pm UTC](https://community.inkbird.com/t/count-down-on-the-application-does-not-work/150790/5 "2024-04-19T17:28:16Z")
It’s ISV-200W model. ---
**Author:** ![Tania](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.inkbird.com/tania/32/88_2.png) [@Tania](https://community.inkbird.com/u/Tania)\ **Post date:** [April 23, 2024, 6:12am UTC](https://community.inkbird.com/t/count-down-on-the-application-does-not-work/150790/6 "2024-04-23T06:12:45Z")
Please understand that the countdown of ISV-200W will not work until the temperature reaches the target temperature. If the temperature is lower or higher than the target temperature, it will pause the timing. ---
**Author:** ![yulia.sherman](https://avatars.discourse-cdn.com/v4/letter/y/90db22/32.png) [@yulia.sherman](https://community.inkbird.com/u/yulia.sherman)\ **Post date:** [April 23, 2024, 8:07am UTC](https://community.inkbird.com/t/count-down-on-the-application-does-not-work/150790/7 "2024-04-23T08:07:21Z")
That’s absolutely clear. I’ve been using the tool for about 6 months, so I know that. ---
**Author:** ![Tania](https://yyz1.discourse-cdn.com/flex031/user_avatar/community.inkbird.com/tania/32/88_2.png) [@Tania](https://community.inkbird.com/u/Tania)\ **Post date:** [April 26, 2024, 7:22am UTC](https://community.inkbird.com/t/count-down-on-the-application-does-not-work/150790/8 "2024-04-26T07:22:22Z")
Please make sure you are using the latest version of the INKBIRD app. ISV-200W stays connected to WIFI. Could you please provide your country, phone model, and problem video to **email** [support@inkbird.com](mailto:support@inkbird.com)? Engineers will check it. Thanks.