# Aquarium Heater Inkbird Heating Thermostat ITC306T

**URL:** <https://community.inkbird.com/t/aquarium-heater-inkbird-heating-thermostat-itc306t/67404>\
**Category:** Uncategorized\
**Created:** [July 8, 2023, 9:24pm UTC](https://community.inkbird.com/t/aquarium-heater-inkbird-heating-thermostat-itc306t/67404 "2023-07-08T21:24:13Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![ygalehrlich](https://avatars.discourse-cdn.com/v4/letter/y/47e85d/32.png) [@ygalehrlich](https://community.inkbird.com/u/ygalehrlich)\
**Post date:** [July 8, 2023, 9:24pm UTC](https://community.inkbird.com/t/aquarium-heater-inkbird-heating-thermostat-itc306t/67404/1 "2023-07-08T21:24:13Z")

</div>

I have a 90 gallon aquarium with cichlids. It has 2 heaters: Eheim 150 W and a Penn Plax 150 W.  
I connected them both to to the Inkbird Heating Thermostat Aquarium Submersible Probe Sensor ITC306T , and maintain a temp of 24 degrees Celsius. I have been using the Inkbird ITC306T for 3 months now and it has been working very well, and it is accurate to within 0.5 degrees Celsius. I strongly recommend it